Forklift solid tire manufacturers talk about how to check the suitability of tires and rims
The rims of solid tyres and corresponding pneumatic tyres can be interchanged. However, the loading and unloading of solid tire rims can only be completed with auxiliary tools (tooling) on the press. To ensure the safety and accuracy of the installation process of solid tire manufacturers, the following rules should be followed:
1. Select a suitable tire press
At present, there are 120 tons, 200 tons, 250 tons, 300 tons, 350 tons of tire presses in common use. First of all, you should select a suitable tire press according to your own needs.
2. Inspection of tyres and rims
First, check the suitability of tires and rims. The width of rims used for tires of the same specification is different. Confirm it first when installing. Rim inspection includes whether there are defects and burrs on the rim. If there is any burr, polish it first, otherwise it will easily damage the tire hub and affect the installation and use.
3. In order to ensure that the tire can be installed in place smoothly and reduce the friction with the rim, the inner surface of the tire hub and the outer surface of the rim need to be sprayed and coated with lubricant. The lubricant can be commonly used soap water, detergent water, etc. If conditions permit, the special lubricant for the tire can be used, but the grease and other commonly used industrial lubricants can not be used, because they will swell the rubber and damage the tire.
4. When the tire is placed on the rim, the head should be flat and not skewed, otherwise it is difficult to install, and it will swing left and right when it is used. The rim must be installed in place, and the bolts must be tightened, otherwise the slip ring or the tire rim separation will cause danger.
5. According to the requirements of ETRTOEDI standard, when loading tyres, it is necessary to keep the same axle using the same manufacturer and the same specification tyres, and it is not allowed to mix them with pneumatic tyres.
Tel: 18961915456
Email: superant2017@126.com
Address: Xingda Industrial Park, Sheyang County, Yancheng City, Jiangsu Province
![]() | |
Contact us |