江西How to replace the solid tire of forklift truck

How to replace the solid tire of forklift truck
When replacing the solid tire of the forklift, there is a danger of being squeezed when the hydraulic jack is dislocated. When using the hydraulic jack to lift the forklift, determine whether the hydraulic jack is stable, and do not crawl under the lifted forklift.
The pressure of forklift tires is very high and dangerous.
Do not disassemble or assemble tires, inner tubes, rims, or inflate the forklift tires on the forklift. These can only be operated with professional equipment and skills and professional training.
Remove the load of the forklift, park the forklift on a level and solid road, and apply the parking brake system. Place a backing plate under the forklift tire to be replaced. Be sure to jack the forklift at the specified jacking position. When replacing the front tire, it should be under the gantry on both sides, and when replacing the rear tire, it should be under the counterweight.

See the extent to which the forklift jack up to the solid tire of the forklift and still slightly contact with the ground. Place a pad under the frame to prevent it from falling. When replacing the front tire, place a pad at the front side. When replacing the rear tire, place a backing plate at the rear side.
For forklift tires equipped with split rims, the rim connecting bolts cannot be loosened. After pressure relief, be sure to loosen the hub nut equipped with split wheel rim. To effectively ensure safety, when inflating or replacing a forklift tire, put your body in front of the tire tread and do not work on the side of the solid tire. When using the air compressor to adjust the air pressure, adjust the compressor pressure in advance to prevent deformation or cracking of the wheel rim. When installing and replacing tyres, check that tyres with deformed or cracked rims cannot be used.