How to deal with the damaged industrial solid tire

How to deal with the damaged industrial solid tire
At present, solid tires are only used for high-load vehicles or machinery running at low speed, and also for machinery in fixed position compared with pneumatic tires, because solid tires are more wear-resistant. Solid tyres are mainly used for industrial vehicles such as low-speed and high-load lifting vehicles, traction vehicles, flat and flat cars, and solid tyres are also widely used in all walks of life. If there is any damage, how should we deal with it? Next, let's introduce the solid tire manufacturers of forklift trucks!
1. When small holes are found in the inner tube, hot or cold repair can be carried out. Roughly file around the damaged area of the inner tube, paste the fire patch rubber on the damaged area, and make the hole just in the middle of the patch rubber, then install the tire patch clamp on the normalized patch rubber, tighten the screw and press it tight, and then ignite the heating agent on the fire patch rubber. After 10-15min, it can be tightly bonded.

2. When the outer tire of a solid tire has cracks, holes, blisters, delamination and other damage, it should be repaired or repaired according to the specific situation. If there are continuous cracks around the outer tire body, the tread rubber has been polished and has large holes, the tire line layer has circular cracks and the whole ring is separated, it should be replaced.
3. Timely replacement: If the inner tube has serious folding, cracking, aging, sticky, deformation and other problems that cannot be corrected, it needs to be replaced in time. We should check the tire pressure regularly, try to check it every other month, and make up for the insufficient tire pressure in time. Before getting on the highway, check it regularly to ensure driving safety.